GIGABYTE M/B B450 M DS3HV2

CPU
– AM4 Socket: Supports AMD Ryzen™ 5000 series / Ryzen™ 5000 G-Series/ 3rd Gen Ryzen™/ 2nd Gen Ryzen™/ 1st Gen Ryzen™/ 2nd Gen Ryzen™ with Radeon™ Vega Graphics/ 1st Gen Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics Processors

Chipset
– AMD B450

Memory
– 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
– Support for DDR4 3600(O.C.)/3466(O.C.)/3200(O.C.)/2933/2667/2400/2133 MHz memory modules
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz
– The DVI-D port does not support D-Sub connection by adapter.
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz(Note)
– Support for HDMI 2.0 version and HDCP 2.2.

Audio
– Realtek® Audio codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE’s website for details on configuring the audio software.
– Support for S/PDIF Out

LAN
– Realtek® GbE LAN chip (1 Gbps/100 Mbps)

Expansion Slots
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)(Note)
– For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– (The PCIEX16 slot conforms to PCI Express 3.0 standard.)
– 1 x PCI Express x16 slot, running at x4 (PCIEX4)
– 1 x PCI Express x1 slot
– (The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)

Multi-Graphics Technology
– Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies

Storage Interface
– 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2* SSD support)
– Actual support may vary by CPU.
– Supports only M.2 SATA SSDs when using an AMD Athlon™-series/ 7th Gen. A-series or Athlon™ X4  APU.
– 4 x SATA 6Gb/s connectors
– Support for RAID 0, RAID 1, and RAID 10
– Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

USB
– 2 x USB 3.1 Gen 1 ports available through the internal USB header
– 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
– 4 x USB 3.1 Gen 1 ports on the back panel

Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x CPU fan header
– 1 x system fan header
– 1 x M.2 Socket 3 connector
– 4 x SATA 6Gb/s connectors
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x CPU cooler LED strip/RGB LED strip header
– 1 x USB 3.1 Gen 1 header
– 2 x USB 2.0/1.1 headers
– 1 x Trusted Platform Module (TPM) header (2×10 pin, for the GC-TPM2.0 module only)
– 1 x serial port header
– 1 x Clear CMOS jumper

Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x DVI-D port
– 1 x HDMI port
– 4 x USB 3.1 Gen 1 ports
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 3 x audio jacks

I/O Controller
– iTE® I/O Controller Chip

H/W Monitoring
– Voltage detection
– Temperature detection
– Fan speed detection
– Overheating warning
– Fan fail warning
– Fan speed control

BIOS
– 1 x 128 Mbit flash
– Use of licensed AMI UEFI BIOS
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Operating System
– Support for Windows 11 64-bit
– Support for Windows 10 64-bit

Form Factor
– Micro ATX Form Factor; 24.4cm x 21.5cm